RC Qatar RC
 


*
Welcome, Guest. Please login or register.
Did you miss your activation email?
June 20, 2018, 05:23:17 AM


Login with username, password and session length
Pages: [1]   Go Down
  Print  
Author Topic: Matching lipo,motor,esc  (Read 2875 times)
0 Members and 1 Guest are viewing this topic.
johnmarquez
ForumJunior
**
Offline Offline

Posts: 10


« on: June 27, 2014, 11:36:21 AM »

Currently using the Mega Motor: The Motor is rated for 2s.

Weight: 76g
Dimensions: 28 x 36.4mm
Shaft Diameter: 3.2mm
No Load Speed: 4600rpm/1V
Maximum Current: 35A
Resistance of armature: 6 mohm
Number of Poles: 6
Number of Winds: 2

With a Platinum 40amp watercooled esc & 2s, 1800mah, 65c-130c nanotech lipo.

Boat weighs between 450-500grams.

Currentl prop at WOT on AVG.
The temps are super super low for the motor at 95-105F
The Esc is about 90-100F
The lipo is about 120-130F

I'm wondering if I can run a 3s, 30C similar size and weight lipo to increase
performance of the motor without burning something out.

I'm not quite getting how 3 cells impact the motor vs 2 cells.

The 3s, 1800mah, 30C constant vs the 2s, 1800mah, 65C constant

Basically, I'm looking for more top end speed without having to change anything out.

If worse comes to worse...I will change out the motor and esc. to do this...

Just wanted some feedback.

Cheers
Logged

Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder


2008-2011 (c) RC Qatar
Valid XHTML 1.0! Valid CSS!